Samsung Galaxy S Advance GT-I9070P Firmware file will solve your Samsung problems such as bootloop, forget passwords, forget patterns, or even Bypass FRP. There are also firmware downloads, drivers, and tutorial on how to flash. On this page, you can also download the latest or older Samsung Galaxy S Advance GT-I9070P Firmware version.
After all the materials downloaded, move them to one folder.
Extract the Samsung flash file with .zip.
Install the Samsung driver.
Open and run Odin.
Turn off your device.
Then go to Download Mode, press and hold down "Volume Down + Home + Power" together, you will see a "Warning" message, then you should quickly press Volume Up.
Then click the "AP" and locate the .md5 file earlier in the extracted folder. If there are more than "AP" files, please input them according to their original name "BL", "CP", "CSC".
And make sure the settings should be the same as below (only "Auto Reboot" and "F. Reset Time" are checked).
Click on "Start" button to start flashing.
A successful flash sign will display the message "PASS!" in the upper left of the Odin application.
Flash Samsung Galaxy S Advance GT-I9070P Firmware finally is done.
We do not host the files (firmware, flash tool, drivers, and more) that are in each link.
Every firmware that we share has been tested, we will add information if the firmware has not been tested.
The tutorial that we share is the way commonly used for flashing. If there is damage to your device, it is not our responsibility. We always remind you to back up your data before flashing.
If You Don't Agree To The Terms Contained In This Agreement, Please Exit the Web Site Immediately.
