Mi Pad 3 China Firmware (Cappu)

Mi Pad 3 China Firmware (Cappu) file will solve your Xiaomi problems such as bootloop, forget passwords, forget patterns, or even Bypass FRP. There are also firmware downloads, drivers, and tutorial on how to flash. On this page, you can also download the latest or older Mi Pad 3 China Firmware (Cappu) version.

Download Mi Pad 3 China Firmware (Cappu) via Fastboot and Recovery

Note: The firmware below is official from MIUI. We ROM Droidve never touch the firmware content.

Mi Pad 3 China Firmware (Cappu) Fastboot

File NameMi Pad 3
BranchWeekly
CodenameCappu
Version9.8.29
RegionChina
Build Date2019-08-29
MD531700b3ecaf31a01d1a0be3e32279297
File Size1.2 GB
Flash MethodFastboot Method
File NameMi Pad 3
BranchStable
CodenameCappu
VersionV10.2.1.0.NCICNXM
RegionChina
Build Date2019-01-14
MD54e50042edd3069f9daa4dbbc653fe9bd
File Size1.2 GB
Flash MethodFastboot Method

Mi Pad 3 China Firmware (Cappu) Recovery

File NameMi Pad 3
BranchWeekly
CodenameCappu
Version9.8.29
RegionChina
Build Date2019-08-30
MD57a8c59b59e375d76a03b91f5b6a479bd
File Size1.2 GB
Flash MethodRecovery Method
File NameMi Pad 3
BranchStable
CodenameCappu
VersionV10.2.1.0.NCICNXM
RegionChina
Build Date2019-01-14
MD5b3ef80b9e22441ab1c921e8a4750ca07
File Size1.2 GB
Flash MethodRecovery Method

How to Flash Mi Pad 3 China Firmware (Cappu) Flash File via Fastboot ROM?

  1. If the link from Google Drive and you got quota limit visit Bypass Limit Download Google Drive.
  2. For newest Xiaomi device, you need to unlock bootloader before flashing.
  3. Visit the link How to Unlock Bootloader Xiaomi? (simple tutorial).
  4. Download the firmware by Fastboot flash method.
  5. Extract the firmware and install the driver.
  6. Open Mi Flash Tool.
  7. Turn off your Xiaomi device and boot to fastboot mode by press "Volume Down + Power".
  8. Connect the device to the PC, and click refresh button Mi Flash Tool.
  9. Browse and find the firmware folder.
  10. Click Flash button to start flashing.
  11. Wait until show "flash done" on status tab.
  12. Flash Mi Pad 3 China Firmware (Cappu) is done.
  13. For full tutorial visit How to Flash Xiaomi Firmware Fastboot ROM via Mi Flash Tool.
DO WITH YOUR OWN RISK

How to Flash Mi Pad 3 China Firmware (Cappu) Flash File via Recovery?

  1. Download the firmware by Recovery flash method.
  2. If the link from Google Drive and you got quota limit visit Bypass Limit Download Google Drive.
  3. Make sure your battery more than 80%.
  4. Move the firmware to your internal or SD Card.
  5. Go to Updater application or go to Settings -> About Phone -> System Update, click the 3 dots on the right-top, and select your zip firmware.
  6. The Xiaomi device will reboot.
  7. Just wait until flashing 100%.
  8. Your device will booting into system wizard like usual.
  9. Flash Mi Pad 3 China Firmware (Cappu) is done.
  10. For full tutorial visit How to Flash Xiaomi Firmware via Recovery.
DO WITH YOUR OWN RISK
  1. We do not host the files (firmware, flash tool, drivers, and more) that are in each link.
  2. Every firmware that we share has been tested, we will add information if the firmware has not been tested.
  3. The tutorial that we share is the way commonly used for flashing. If there is damage to your device, it is not our responsibility. We always remind you to back up your data before flashing.
  4. If You Don't Agree To The Terms Contained In This Agreement, Please Exit the Web Site Immediately.