|Meizu C9 Firmware Information|
|File Type||PAC Flash File|
|File Size||1 GB|
|Flash Method||SPD Flash Tool – How to Flash Firmware Android via SPD Flash Tool|
How to Flash Meizu C9 Firmware via SPD Flash Tool
- If the link from Google Drive and you got Quota Exceeded, please follow this tutorial Bypass Limit Download Google Drive
- Extract the Meizu C9 Firmware.
- Install the SPD USB driver.
- Turn off your device.
- Click on the Gear 1 icon and find the PAC file where you extracted.
- Click on the Gear 2 and Setting Bautrate to 921600 or leave it on default.
- Remove the battery (just turn off your phone for a non-removable battery) and hold Volume Up and connect to the PC with cable data.
- If flash is running, release the volume button.
- Flash will run automatically if the driver installed correctly.
- Wait until flash finished and show the Passed message from SPD Flash Tool.
- Unplug the cable data and turn on your device, if the Passed message showing up.
- Finally, flash Android Stock ROM via SPD flash tool is done.
- Flash Meizu C9 Firmware done.
- Read Full How to Flash Firmware Android via SPD Flash Tool, where you can download the Flash Tool and USB driver.
- Backup important files to your PC.
- This flash will wipe your internal storage.
- Do With Your Own Risk
- We do not host the files (firmware, flash tool, drivers, and more) that are in each link.
- Every firmware that we share has been tested, we will add information if the firmware has not been tested.
- The tutorial that we share is the way commonly used for flashing. If there is damage to your device, it is not our responsibility. We always remind you to back up your data before flashing.
- If You Don't Agree To The Terms Contained In This Agreement, Please Exit the Web Site Immediately.