How to Flash Using SP Flash Tool

These are tutorials to use SP Flash Tool for Mediatek Phone Chipset. With this Tutorial How to Flash Firmware Android via SP Flash Tool, you can also solve other error problems, such as:

  • Forgot Password
  • Android Stuck on Logo
  • Forget Pattern
  • Bootloop
  • Soft Brick
  • Android Blank Screen
  • The touch screen is not sensitive
  • Slow not responsive / Hang
  • Virus malware
  • Unfortunately, the app has stopped
  • Android often restarts itself
  • And other errors

Tools and Firmware Download

Drivers

MTK USB Driver

USB Driver VCOM

(install when flash won’t running)

CDC Driver Installer

(Optional, install when the device can’t detect on PC)

SP Flash Tool
SP Flash Tool V5SP Flash Tool V3
SP Flash Tool v3.1344 Win.zipSP Flash Tool v3.1332 Win.zip
SP Flash Tool v3.1328 Win.zipSP Flash Tool v3.1316 Win.zip
SP Flash Tool v3.1312 Win.zipSP Flash Tool v3.1238 Win.zip
SP Flash Tool v3.1222 Win.zip
  1. USB cable data
  2. Your Phone and the Mediatek Firmware

How to Flash Android Firmware via SP Flash Tool

  1. First of all, get all the tools and extract the .zip file.
  2. Extract the Android flash file and you will see “MTxxxx_Android_scatter.txt“.
  3. Install USB driver.
  4. Install and run the SP Flash Tool application.
  5. Click on Scatter-loading, then open the folder of Android firmware, then click “MTxxxx_Android_scatter.txt“.Scatter Android Firmware
  6. Wait until the firmware loaded.
  7. Uncheck on the Preloader file when you not sure of this ROM for Android type. This will prevent hard brick, this is optional.Remove Preloader SP Flash Tool
  8. Make sure to select Download Only mode, then click the Download button.Start Flashing Android
  9. Now Turn off your device and remove the battery (for non-removable battery, just need to turn off the device).
  10. Press Volume Up and connect the device to PC (press Volume Down when flash not running, unplug the cable before reconnect, and repeat the steps above).
  11. Flash Android will run automatically.
  12. Wait until flashing finishes with a green sign.Flash Succcessful
  13. Unplug the cable and turn on your device.
  14. The first booting process will take 10-15 minutes, so just wait until entering the wizard menu.
  15. Flash Android firmware is done.

NOTE:

  • When the device can’t detect on PC, try to reinstall the driver (optional drivers).
  • When flashing won’t running on “Download Only” mode, change with “Firmware Upgrade” mode, disconnect the device before reflashing.
  • When getting bootloop after flash, try to hard reset via recovery.

Firmware Upgrade Android

DO WITH YOUR OWN RISK
  1. We do not host the files (firmware, flash tool, drivers, and more) that are in each link.
  2. Every firmware that we share has been tested, we will add information if the firmware has not been tested.
  3. The tutorial that we share is the way commonly used for flashing. If there is damage to your device, it is not our responsibility. We always remind you to back up your data before flashing.
  4. If You Don't Agree To The Terms Contained In This Agreement, Please Exit the Web Site Immediately.